A Huge Juniper Transformed

Last Saturday I decided to attend a meeting at Midway Bonsai Society after hearing that a young member of Eastern Bonsai Society (EBS)  - the club I've been a member of for 12 years - would be doing a demonstration on a huge juniper.

Shaundre Craukamp may only be 19, but he already has a lot of bonsai experience, having joined his first club at the age of 10. After that club closed, he moved to EBS when he was 14. A year later he won the EBS and regional new talent competitions. Later that year he went on to win the national competition, becoming the youngest South African to do so.

The trees used for those competitions were nursery stock- Juniper Procumbens Nana, a little smaller than the one he's seen working on in an earlier post (he's the guy in black). Unlike the one in that post, however, competition trees have had no previous styling.

The tree he worked on this time was a collected tree - Juniper Chinensis - belonging to Jonathan Cain, a member of Midway.

Shaundre started by doing a little carving on some of the dead wood at the bottom. (There was far too much to be done in one session.)

He chose to do the carving by hand.

Then he moved on to the apex.

As everything up there was long and straight, and growing away from the trunk, a lot of bending was required - too much to be done at once without putting excessive strain on the tree, but enough to show the direction in which the tree will be developed.

First he split the area he wanted to bend, then he applied tape to prevent the branch breaking when he bent it.

After wiring the branch and adding some guy wires, he was able to pull it down in the direction he wants it to grow. I believe it will be brought closer to the trunk when it's had time to heal.

This was already a big improvement, but the branch coming up from the bend looked out of place, so he removed it, leaving a stub which will be used as a jin.

He then bent one of the lower branches up to create a new apex.

He marked a few areas that will need carving, including the marked branch, which is currently far too long and thick.

After all the small branches had been wired (with help from Jonathan and his wife Denise) and re-positioned the tree looked like this.

Shaundre will be paying Midway another visit next spring to do further work on this tree.

This Little Juniper Survived

Some sloppy wiring a year ago reduced my healthy little Juniper Procumbens Nana to half a tree.

August 2018

Thankfully eight months later it has made a good recovery.

April 2019 - too straight

It was still looking very straight and ugly though, so yesterday I decided to make another attempt at styling it.

I struggle with thick wire, especially on little trees,so I decided I wasn't going to risk that again. I don't want to kill what's left of the tree!

After an unsuccessful attempt to put some movement into the tree using thin wire doubled up, I decided to try something different. Instead of using a guy wire, however, I pulled the apex to the right and slightly forward using a humble cable tie - a trick I picked up at last Saturday's club meeting.

April 2019 - not so straight any more

Much better!

Unfortunately even the minimal wiring I attempted caused a little damage to the bark.

Damaged bark at base and a new bud a little higher up

Hopefully it's not bad enough to do any long term damage.

I'll probably wait another year before I prune it. If I'm lucky some of the new buds on the trunk with grow and give me a couple of extra branches to work with.

The Benefit of Neglect

I hate to admit that the last time I worked on my two neglected ficuses was when I repotted them in November 2015. Because of time constraints only one ever made it into my previous blog post and once again that's the only one I've had time to work on so far. Coincidentally, for the moment it's the better tree.

In November 2015 that tree looked like this:

Ficus Natalensis - November 2015

A few sharp bends and hardly any taper!

Although my neglect means that the trees are no closer to being bonsai than they were three years ago, the move to bigger pots has allowed them to grow big and tall and their trunks have fattened up considerably. Unfortunately the top growth has blocked light from the lower part of the trees and as a result, both have lost some lower branches. The tree above also developed a massive low branch which grew upwards, reaching a height  twice that of the intended apex.

Same tree - March 2019

Under the circumstances I found myself having to treat it as nursery stock when I took it to a workshop on Saturday afternoon.

First I had to get both trees out of the greenhouse though, and that proved to be quite a mission as once again one had sent a root into the other one's pot and both had also sent roots through the slats of the shelf they were living on. To complicated matters further, the neighbouring orchid (a gift which I tend to ignore) had sent roots into both pots. That meant there were quite a lot of roots that had to be cut before I could move the trees.

Once at the workshop the first step was to remove that huge branch.

After removing the huge branch

The tree was already looking better but it was rather top heavy, with a leader growing in the wrong direction. The club member I was working with recommended I cut back to a new leader, advice I was happy to follow, as I'd already said in 2015 that "At a later stage I might reduce the height further".

March 2019 - after pruning

As it's still in the same pot, the change in the thickness of the trunk is pretty obvious.

I've left all the aerial roots for now as we're headed into winter. I'll decide whether to keep any of them when I repot the tree in spring - as long as I don't forget!!

As for the second tree, it looked like this when I removed it from the greenhouse:

Second tree - March 2019

I've removed a few dead branches so far and plan to cut it back to the lowest living branch, then wait for back budding before cutting in to a more suitable height. I'd like to make a short, fat little tree from this one.

The Art of Growing Miniature Bonsai

At their most recent meeting one of my bonsai clubs (I now belong to two) had a fascinating speaker, Hennie Reyneke, who is well known for his mame trees.

Hennie holding a little Ficus Burtt-Davyi

I've seen his trees before and was delighted to get the opportunity to see how he creates his little masterpieces.

Of course, as is the case with bigger trees, creating good mame takes time, but seeing tiny cuttings transformed into the skeleton on which future bonsai will be built was really inspiring and made me feel a little bit guilty about some of the cuttings I've thrown away lately. I do however still have a lot of small rooted cuttings that I can play with and having already started trying to downsize some of my own trees, I feel certain that this is the right way for me to go.

Here is a close up of Hennie pruning one tiny tree:

Another being wired:

And the same tree after a little pruning:

As with all trees, it is important that everything is in proportion for miniatures, so you should choose species with leaves which are able to reduce well. Flowers and fruit must be naturally small as their size cannot be reduced. Big flowers and fruit on a tiny tree will look wrong!

Some of the species that Hennie recommended for miniatures are Maples, Celtis, Ficus, Cotoneaster, Pyracantha, Buxus and Lonicera, as well as conifers like Juniper Procumbens Nana.

A little literati

If you've got the patience to do so, growing from seed is a good way to grow mame bonsai because you can create taper and balance without the scarring caused by heavy cuts. Hennie also mentioned that fig varieties develop a thick buttress base if grown from seed. I have no immediate plans for trying that though as I've managed to grow ficuses with nice bases from cuttings, root cuttings and air layers. I'm really happy with the base of the Ficus Natalensis in the last photo in this post. That little tree was grown from a root cutting.

Miniature bonsai can of course also be created from small collected trees or nursery stock.

It is important to prune your little trees regularly to keep them in shape (something I'm often guilty of forgetting) and they should be repotted once a year, removing heavy roots to encourage the development of a fine root system.

One of the most difficult aspects of caring for miniatures is seeing that they are watered correctly. A good way to avoid them drying out is to stand the little pots in a shallow tray with damp river sand or gravel, providing humidity for your little trees. However over watering will lead to root rot, so drainage is just as important as it is with larger trees.

One of the styles I've never tried growing is root over rock. I've always felt that the rocks will make them too heavy for me too handle. However Hennie showed us a miniature root over rock Ficus, so I guess I no longer have an excuse not to try this style.

Starting a Pyracantha Bonsai From Nursery Stock

A few days ago I found this Pyracantha at the nursery section of a nearby hardware store.

Pyracantha as purchased - January 2019

I shouldn't really be buying more trees, but my only Pyracantha died about a year ago, so I couldn't resist the temptation to replace it.

I was pretty sure I knew what I needed to do with this one, but I took it to a workshop on Saturday in the vain hope that I'd be told my plans were too drastic.

No such luck. It was never going to work as a twin trunk because one trunk had lots of movement while the other was dead straight.

Close-up showing two unmatched trunks

The straight one had to go. Two cuts and I was done.

January 2019 - after pruning

I was really sad to see all the berries go into the trash can, but sometimes the art of bonsai requires sacrifices.

Now I'll let the tree grow for a while before deciding on the next step. Perhaps in time I'll cut it even shorter.

Photo updates will appear on this page.

My First Carving Attempt

When I bought my crab apple a few years ago it was about seven foot tall with no low branches, so it's taken a bit of effort to get it to where it is now.

January 2019 - before pruning

A lot of the tree had to be discarded at the time because repotting was a matter of urgency when I bought it, but there was enough left to allow me to do an air layer before I started developing this, the parent tree.

I'm ashamed to admit that since the air layer was removed, however, I've largely ignored both trees. That created a problem with this one because the top branch on the left was thicker than the lower branches and apex. I had to change something.

Two options presented themselves :

1. change the planting angle and turn the thick branch into the new leader
2. remove that branch

I opted for the latter.

January 2019 - after pruning

After the branch was removed I was left with an ugly bulge where it had been.

In the past I'd have asked for help with that bulge, but I recently bought a Dremel carving tool, so I decided this was the perfect opportunity to try it out.

Janurary 2019 -  after carving

Not a perfect job by any means, but for a first attempt, I'm reasonably happy. When I've got a bit more carving experience, I can still come back and improve on it.

For now I want the two side branches to thicken a little more before I shorten them, and the new leader and back branch need a lot of fattening up.

A Pruning Adventure - an Update on my Reddit Contest Tree

I hate to confess that I've totally neglected my first lonicera, styled in November 2017, then changed a bit after receiving some bad advice. It's now totally overgrown and I need to start all over again.

After seeing how quickly such small trees can get out of control, I'm determined not to let the same thing happen to the lonicera I used for the Reddit nursery stock contest this year, so a few days ago I decided it was time to give it a haircut.

Lonicera - December 2018, before pruning

That's when the fun began.

While trimming some of the top foliage I suddenly became aware of a praying mantis hiding in the branches.

I immediately stopped what I was doing before he came to any harm.

After taking a few photos, it was time to get him out of the tree. Surprisingly I had no difficulty persuading him to climb onto my hand, and was even able to get a few more shots.

I then moved him to the safety of a tree I wasn't planning to work on.

Finally it was time to get back to my lonicera. After a little more work it looks like this:

Lonicera - December 2018, after pruning

That long dangling branch is a new one about two thirds of the way up the trunk which will fill a gap nicely. It needs to thicken up a bit before I prune it. I don't think that will take too long though, so I need to keep a close watch on it.

I'm not happy with the lowest branch on the left yet. Hopefully I'll get some back budding so that I can direct it in the direction I want it to grow. And I'm still considering shortening the tree a little more.

Now that the contest is over, however, I don't need to keep it looking tidy, so I can take my time making my decisions.

Seven Months in the Creation of a Lonicera Bonsai - my Reddit Competition Tree

When I entered Reddit's Nursery Stock Contest back in autumn, I knew that it was going to be a lot more challenging for me than it was for my Northern hemisphere friends because I would have very little of the growing season to work with.

Under the circumstances I'd probably have been better off working with a Juniper than the Lonicera which became my competition tree, and I did buy one. The wrong one! I shouldn't have bought that tree for a number of reasons:

1. I don't enjoy working with Junipers
2. I knew nothing about Juniper Mint Julep until after I'd bought the tree, when a little research led me to believe that the species isn't regarded as good bonsai material
3. The tree I bought was far bigger than the material I like to work with.

The Lonicera I finally entered in the competition had none of those problems. It has tiny leaves which are well suited to bonsai - even mame trees. But in the summer months it's essential to prune regularly or a little one like mine will soon grow totally out of control.

I bought my tree on a cold rainy day in April. A day so miserable I had the entire nursery to myself. Even the staff were reluctant to offer any assistance.

I must have been quite a sight, bent down close to the ground to examine the trees using one hand while I clung onto my umbrella with the other. I stayed well away from the big trees that day.

My purchase looked like this:

Lonicera as purchased, 6 April 2018

I decided to take things slowly, rather than cutting off anything I would regret, so after an initial pruning it looked like this:

First pruning, 6 April

I tied a couple of loose wires around trunks I was considering removing.

A few days later I was feeling more daring and reduced the tree to a very basic frame.

Second pruning, 11 April

Unfortunately some of the branches were still longer than I'd have liked them to be, but I didn't want to kill them by leaving them devoid of foliage.

By early May the tree was pushing out a little new growth, giving me hope that I'd be able to improve on the styling over the next few months.

New growth, 3 May

And by the middle of June it was really overgrown:

Overgrown, 19 June

Time to tidy up:

19 June

I still wasn't getting the back budding I really wanted though, so that left branch in particular was way too long and bare.

July was a slow month with only minimal signs of new growth, so I did nothing.

21 July

Then in August I finally felt there was enough growth lower down to let me shorten some of the branches.

After heavy pruning  - 17 August

Spring growth was pretty good:

21 September

With the benefit of hindsight, maybe I shouldn't have removed so much before submitting my final photo for the contest.

Final contest photo - 21 September

Still, I'm not too unhappy with the outcome given the constraints I was working under.

The contest is over, but the journey continues.

The little guy is growing well.

6 November

I was far less aggressive with my latest pruning because my emphasis has changed. Now I need to fatten up the branches I plan to keep.

6 November - after pruning

That shouldn't take long though. Not on such a tiny tree. As it stands today, the little guy is a mere 11cm tall. And in a few months time I may reduce the height a little further.

The Shrinking Juniper

One of the trees I bought in April as a candidate for Reddit's nursery stock contest was a rather large Juniper Mint Julep. I've already discussed its first styling in an earlier post.

As it was winter in South Africa, the tree has grown very little since then. I hadn't done any further work on it either - until today, when I decided to take it to my club's meeting for some "expert" advice.

April 2018

I wasn't expecting to do much more than remove the unwanted branches that I'd left uncut in April for fear of removing too much in one go and killing the tree. But Junipers are outside my comfort zone so I was looking for confirmation that it was safe to cut them now. With the benefit of hindsight I'm starting to wonder if I'd have been better off if I'd stuck to my original plan and removed those branches at home.

Instead, when the tree went up for critique, everyone seemed to have different ideas, and people soon started bending branches into different positions. One member even shortened the leader (which I was trying to thicken) without asking if I was happy for him to do so.

By this time the tree was already looking quite different from its appearance in the above picture and I was no longer sure where I was headed, so when today's speaker asked if I wanted him to turn it into a dramatic tree,  I agreed. On one condition - that he wouldn't kill my tree.

Before I knew it all the branches were gone and the leader was pulled downwards, leaving me with this:

September 2018

Is there enough left to keep it alive? If it was a Ficus I'd say yes, but with a Juniper I'm not sure.

Plans for the future are a repot as well as carving and bending the jin. For now, however, my major concern is the tree's survival.

Finding the Bonsai Inside the Tree

At last Saturday's BRAT meeting we saw two talented artists at work. Both are recent winners of the national new talent competition.

As is the case with the new talent competition, the artists were supplied with material they'd never seen before. This time, however, they were working with vastly superior material - two Juniper Procumbens Nana "shrubs" which had been grown specifically for use as bonsai. Yet to the untrained eye they might have passed as simple nursery stock.

Here they are at the beginning of the demonstration:

Tree 1

Shaundre's tree

Shaundre Craukamp is a member of Eastern Bonsai Society (my club). He won the national competition in 2015.

Attracting young people to the art of bonsai is a huge concern. Most of my club's members are well over forty. Shaundre represents the future of my club. He's still at school. We desperately need to attract more members of his age.

Tree 2

Stefann's tree

Stefann Pretorius, a member of Suikerbos Bonsai Kai, won the national competition in 2016. Here he is assisted by Hannes Fritz, an experienced bonsai artist who represented South Africa when he did his own demonstration at the 8th World Bonsai Convention in Japan in 2017.

Stefann and Hannes

Stefann's tree

FOR SOUTH AFRICAN READERS

If you're not already a member of a club and would like to join one, visit the SABA website to find a club in your area.